SPECIFICATIONS
Print Mode
Single-side printing (option: dual-side printing)
Print Method
Dye-Sublimation / Resin Thermal Transfer
Resolution
300 dots per inch (11.8 dots per mm) resolution, 16.7 million colors / 256 shades per pixel
Print speed
Batch Mode:
• 26 seconds per card / 138 cards per hour (YMC with transfer)*
• 32 seconds per card / 113 cards per hour (YMCK with transfer)*
• 47 seconds per card / 77 cards per hour (YMCKK with transfer)*
• 37 seconds per card / 97 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)*
• 55 seconds per card / 65 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)* Ribbons
• Full-color, YMC*, 750 prints
• Full-color with resin black, YMCK*, 500 prints
• Full-color with two resin black panels, YMCKK*, 500 prints
• Full-color with resin black and inhibitor panels YMCKI*, 500 prints
• Full-color with resin black and heat seal panel for difficult-to-print surfaces, YMCKH*, 500 prints
• Full-color with fluorescing and resin black, YMCFK*, 500 prints
• Resin black, K, 3000 prints Retransfer Film Options
• Clear (1,500 prints)
• Standard Holographic (500 prints)
• Custom Holographic, special order (500 prints) Overlaminate Options
• Thermal Transfer Overlaminate, .25 mil thick, 500 prints
• CR-80 patch size laminates (1.0 mil thick) All 1 mil overlaminates available in clear, standard holographic design or custom holographic design (special order) Single Wire USB 2.0 encoding options
• ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3
• Contactless Smart Card Encoder (iCLASS and MIFARE)
• Contact Smart Card Encoder reads from and writes to all ISO7816-1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards
Warranty
• Printer – Two years
• Printhead – Lifetime; unlimited pass
Printer interfaces
USB 2.0; internal USB hub to connect peripheral devices; built-in Ethernet (10/100Mps) RS232 network
Software drivers
Windows® 2000 / XP / Server 2003 / Vista (32 & 64 bit) / 7 (32 & 64 bit); Mac OS X v10.4 / v10.5; and Linux**** System Requirements x86 based PC or compatible, Windows 2000, Windows XP, Windows 2003, Windows Vista or Windows 7, 500MHz computer with 256MB of RAM or higher, 500MB free hard disk space or higher
Card capacity
Input hopper: 100 cards (.030” / .762mm);
Output stacker: 200 cards (.030” / .762mm)
Dimensions
• 11.50”H x 12.25”W x 9.25”D / 292mmH x 313mmW x 235mmD (excluding Dual Side and Lamination Modules)
Weight
• 16 lbs. / 7.3 kg. (excluding Dual Side and Lamination Modules)
Power source
Input: 100V - 240V, 50/60Hz
Memory
RAM: 16MB Environment Operating temperature: 65° to 90° F / 18° to 32° C, 20 - 90% RH (non-condensing)
Agency Listings
• Safety: UL 60950, CSA C2.2 No 60950, CB report (EN 60950), and CE mark
• EMC: FCC Part15 Class A, EN 55022: 1998 Class A, CRC c1374, EN 61000-3-2: 2000,EN 61000-3-2: 1995, EN 55024: 1998, CE mark, and CCC mark
Card Specifications
Types ABS, Laminated PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards Note: ABS and PVC cards are not recommended for use in the Lamination Module.***
Maximum print area
Over-the-edge on CR-80 cards Card width/length CR-80 (3.370”L x 2.125”W / 85.6mmL x 54mmW)
Card thickness
• Print only: .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm
• Print/Lamination: .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm Card Cleaning Replaceable cleaning roller (included with each print ribbon)
Options
• Card Lamination Module – single-sided or dual-sided (simultaneous)*
• Magnetic stripe encoding
• 200-card input hopper
• Smart card encoding (contact/contactless)
• Dual-sided printing
• Door and cartridge locks
• Printer cleaning kit
• Secure Proprietary Consumables System
• Custom Secure Holographic Retransfer Film and Overlaminate
UPGRADES
Options
• Card Lamination Module – single-sided or dual-sided (simultaneous)*
• Magnetic stripe encoding
• 200-card input hopper
• Smart card encoding (contact/contactless)
• Dual-sided printing
• Door and cartridge locks
• Printer cleaning kit
• Secure Proprietary Consumables System
• Custom Secure Holographic Retransfer Film and Overlaminate
